Inflatable Contouring Tyre Tread Buffing Machine Technical Parameters
| Dimension |
1920x2150x1850mm |
| Inflation Pressure |
0.1-0.15 Mpa |
| Suitable Ranges of Tyres |
650-1200(15’’,16’’,20’’,22.5’’ )&Max12.00-24'' |
| Voltage & Frequency |
380V,50Hz,3Ph |
| Buffing Head Motor Power |
11 Kw |
| Turntable Motor Power |
2.2 Kw |
| Buffing Head Model |
Z-4-25 |
| Buffing Head Speed |
2980 r/min |
| Wheel Chucks Type |
15’’-16’’,20’’-22.5’’ |
| Wheel Chuck Speed |
42 r/min |
| Front-to-Rear Limits Control Motor |
0.37 Kw |
| Left-to-Right Limits Control Motor |
0.55 Kw |
| Chuck Cylinder |
spc100x400mm |
| Lifting Cylinder |
spc80*100mm |
| Advantages |
1.Lifting Tyres Pneumatically Saving Labors |
| 2.Easy Operation on Portable Control Panel |
| 3.Over-Inflation Protection Function Designed for Safety |
| 4.Rubber Granules Collected by Dust Collector |
| 5.Accurate Buffer Saving Buffing Time |
| 6.Optional for Tyre Shoulder & Sidewall Buffing Device |
Description:The Tire’s Old Tread is Mechanically Removed on Melion’s High Speed Buffers.
Function:Over-Inflated Protection:Ensure the pressure in the tire is in the range of 0.1~0.15Mpa. When pressure exceeds 0.2Mpa, the Safety Air Bleeding Valve on Wheel Chuck shall be activated to instantly bleed air out in case of any parts damaged from over pressure.
Tyre Retreading Equipment
